{"product_id":"st-w-bed-berlingo-expert-proace-rd4-rd45-rd6-3820610313","title":"ST.W.BED. Berlingo\/Expert\/Proace RD4\/RD45\/RD6","description":"\u003cp\u003eKeep the original steering wheel remote control functions when replacing the factory radio with a retrofit HU.\u003c\/p\u003e\u003cp\u003eDepending on the vehicle equipment as well as the range of functions and software of the retrofit HU, individual operating functions may be omitted or replaced by other functions.\u003c\/p\u003e\u003cp\u003eCompare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.\u003c\/p\u003e\u003cp\u003eCheck if one of the listed OEM head units were installed originally.\u003c\/p\u003e\u003cp\u003eAlso check vehicle functionality, vehicle settings and SWC functionality before final assembly.\u003c\/p\u003e\u003cp\u003eNote:\u003c\/p\u003e\u003cp\u003eCAN Bus\u003c\/p\u003e\u003cp\u003econnector: 40 Pin Quadlock PSA \u0026gt; item: 42cx30\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003econnection SWC speaker PDC 42cxpdc item image 4:\u003c\/li\u003e\n\u003cli\u003ePin 5: 42cxpdc red\u003c\/li\u003e\n\u003cli\u003ePin 11: 42cxpdc black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003echeck dip switches for retrofit HU\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003evehicles with Blaupunkt \/ Continental \/ Siemens VDO RD4 \/RD45 OEM HU with volume control knob\u003c\/li\u003e\n\u003cli\u003evehicles with Clarion MQ-RD6 OEM HU monochrome display and central rotary knob\u003c\/li\u003e\n\u003cli\u003evehicles with Continental RD45 OEM HU with rotary knob\u003c\/li\u003e\n\u003cli\u003evehicles with PDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003evehicles without Bosch OEM HU\u003c\/li\u003e\n\u003cli\u003evehicles without Magneti Marelli RT3 \/ RT6 \/ Harman Becker NG4 OEM Sat Nav with volume control knob\u003c\/li\u003e\n\u003cli\u003evehicles without JBL OEM amplified system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003evehicle settings with SWC supported (look into the manual)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003evehicles with ECO-mode:\u003c\/li\u003e\n\u003cli\u003e+12V continuous current terminal 30 Battery fused\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003evehicles with PDC switch:\u003c\/li\u003e\n\u003cli\u003ePDC sound playback must be activated\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003ediagnostic LED:\u003c\/li\u003e\n\u003cli\u003eblue flashing \u0026gt; CAN Bus search\u003c\/li\u003e\n\u003cli\u003eblue constant \u0026gt; CAN Bus active\u003c\/li\u003e\n\u003cli\u003ered \u0026gt; +12V ignition current active\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVehicle application:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCitroën\u003c\/li\u003e\n\u003cli\u003eCitroën Berlingo (7) 06\/2008 - 03\/2012\u003c\/li\u003e\n\u003cli\u003eCitroën Berlingo (7) 04\/2012 - 05\/2015\u003c\/li\u003e\n\u003cli\u003eCitroën Berlingo (7) 06\/2015 - 06\/2018\u003c\/li\u003e\n\u003cli\u003eCitroën C2 (J) 12\/2004 - 12\/2009\u003c\/li\u003e\n\u003cli\u003eCitroën C3 (F) 10\/2005 - 01\/2010\u003c\/li\u003e\n\u003cli\u003eCitroen C3 (S) 01\/2010 - 03\/2013\u003c\/li\u003e\n\u003cli\u003eCitroen C3 (S) 04\/2013 - 01\/2017\u003c\/li\u003e\n\u003cli\u003eCitroën C4 (L) 11\/2004 - 08\/2010\u003c\/li\u003e\n\u003cli\u003eCitroën C5 (D) 10\/2004 - 04\/2008\u003c\/li\u003e\n\u003cli\u003eCitroën C8 (E) 01\/2008 - 07\/2012\u003c\/li\u003e\n\u003cli\u003eCitroën C8 (E) 07\/2012 - 06\/2014\u003c\/li\u003e\n\u003cli\u003eCitroën DS3 (S) 03\/2010 - 07\/2014\u003c\/li\u003e\n\u003cli\u003eCitroen Jumpy (V) 02\/2007 - 05\/2016\u003c\/li\u003e\n\u003cli\u003eCitroen Jumpy (V) 09\/2016 - 01\/2024*\u003c\/li\u003e\n\u003cli\u003eCitroen Nemo (A) 08\/2008 - 12\/2015\u003c\/li\u003e\n\u003cli\u003eCitroen Spacetourer (V) 03\/2016 - 03\/2024*\u003c\/li\u003e\n\u003cli\u003eCitroen Xsara Picasso (C) 03\/2004 - 02\/2010\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eFiat\u003c\/li\u003e\n\u003cli\u003eFiat Scudo (ZAF 270) 02\/2007 - 07\/2016\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eOpel\u003c\/li\u003e\n\u003cli\u003eOpel Vivaro C (V) 09\/2019 - 01\/2024*\u003c\/li\u003e\n\u003cli\u003eOpel Zafira Life V (V) 02\/2019 - 01\/2024*\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003ePeugeot\u003c\/li\u003e\n\u003cli\u003ePeugeot 207 (WC) 06\/2006 - 06\/2009\u003c\/li\u003e\n\u003cli\u003ePeugeot 207 (W) 06\/2009 - 07\/2015\u003c\/li\u003e\n\u003cli\u003ePeugeot 208 (C) 04\/2012 - 04\/2015\u003c\/li\u003e\n\u003cli\u003ePeugeot 307 (3\/3 Break\/3 SW\/3 CC) 06\/2005 - 03\/2009\u003c\/li\u003e\n\u003cli\u003ePeugeot 308 (4\/4 GTI\/4 SW\/4 CC) 09\/2007 - 07\/2015\u003c\/li\u003e\n\u003cli\u003ePeugeot 407 (6\/6 SW\/6 Coupé) 05\/2004 - 07\/2008\u003c\/li\u003e\n\u003cli\u003ePeugeot 407 (6\/6 SW\/6 Coupé) 02\/2006 - 03\/2011\u003c\/li\u003e\n\u003cli\u003ePeugeot 607 (9) 10\/2004 - 04\/2009\u003c\/li\u003e\n\u003cli\u003ePeugeot 807 (E) 07\/2002 - 02\/2008\u003c\/li\u003e\n\u003cli\u003ePeugeot 807 (E) 02\/2008 - 06\/2014\u003c\/li\u003e\n\u003cli\u003ePeugeot 3008 (OU) 06\/2009 - 10\/2013\u003c\/li\u003e\n\u003cli\u003ePeugeot 5008 (O) 10\/2009 - 10\/2013\u003c\/li\u003e\n\u003cli\u003ePeugeot Bipper (A) 12\/2007 - 12\/2015\u003c\/li\u003e\n\u003cli\u003ePeugeot Expert (X) 02\/2007 - 08\/2016\u003c\/li\u003e\n\u003cli\u003ePeugeot Expert (X) 03\/2016 - 2024\u003c\/li\u003e\n\u003cli\u003ePeugeot Partner (7) 05\/2008 - 03\/2012\u003c\/li\u003e\n\u003cli\u003ePeugeot RCZ (4J) 04\/2010 - 09\/2015\u003c\/li\u003e\n\u003cli\u003ePeugeot Traveller 03\/2016 -2024*\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eToyota\u003c\/li\u003e\n\u003cli\u003eToyota Proace 03\/2013 - 08\/2016\u003c\/li\u003e\n\u003cli\u003eToyota Proace (V) 03\/2016 - 04\/2024*\u003c\/li\u003e\n\u003cli\u003eToyota Proace Verso (V) 03\/2016 - 04\/2024*\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFollowing signals are provided:\u003c\/p\u003e\u003cp\u003eReimported vehicles or vehicles with different software may be incompatible in functions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003epink: +12V ignition clamp 15 1,5A max.\u003c\/li\u003e\n\u003cli\u003eorange: +12V illumination clamp 58 0,1A max.\u003c\/li\u003e\n\u003cli\u003ewhite: +12V reverse gear signal 1,5A max.\u003c\/li\u003e\n\u003cli\u003eyellow\/green yellow\/red: speed pulse signal\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSWC\u003c\/p\u003e\u003cp\u003evehicle settings supported\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e*vehicles with PDC and Clarion MQ-RD6 OEM HU monochrome display and central rotary knob\u003c\/li\u003e\n\u003cli\u003e*vehicle settings not supported\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHU application:\u003c\/p\u003e\u003cp\u003eMultilead different HU \u0026gt; item: 42arc100\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAlpine 3,5mm jack connector \u0026gt; item: 42arc101\u003c\/li\u003e\n\u003cli\u003eBlaupunkt 2010\u0026gt; 3,5mm jack connector \u0026gt; item: 42arc107\u003c\/li\u003e\n\u003cli\u003eBlaupunkt 2010\u0026gt; Key1 \/ Key2 \/ (GND) connector \u0026gt; item: 42arc000\u003c\/li\u003e\n\u003cli\u003eChina Hu Key1 \/ Key2 \/ (GND) \u0026gt; item: 42arc000\u003c\/li\u003e\n\u003cli\u003eClarion 3,5mm jack connector \u0026gt; item: 42arc104\u003c\/li\u003e\n\u003cli\u003eDigital Dynamics single lead connector \u0026gt; item: 42arc108\u003c\/li\u003e\n\u003cli\u003eESX Key1 \/ Key2 connector \u0026gt; item: 42arc000\u003c\/li\u003e\n\u003cli\u003eJVC 3,5mm jack connector \u0026gt; item: 42arc104\u003c\/li\u003e\n\u003cli\u003eJVC single lead connector \u0026gt; item: 42arc105\u003c\/li\u003e\n\u003cli\u003eKenwood single lead connector \u0026gt; item: 42arc105\u003c\/li\u003e\n\u003cli\u003eKenwood 2017\u0026gt; 3,5mm jack connector \u0026gt; item: 42arc107\u003c\/li\u003e\n\u003cli\u003eKenwood 2020\u0026gt; Key1 \/ Key2 \/ GND connector \u0026gt; item: 42arc000\u003c\/li\u003e\n\u003cli\u003ePioneer 3,5mm jack connector \u0026gt; item: 42arc107\u003c\/li\u003e\n\u003cli\u003ePioneer AVH\/DMH\/SPH 3,5mm jack connector \u0026gt; item: 42arc1072\u003c\/li\u003e\n\u003cli\u003eSnooper Key1 \/ Key2 connector \u0026gt; item: 42arc000\u003c\/li\u003e\n\u003cli\u003eSony 3,5mm jack connector \u0026gt; item: 42arc107\u003c\/li\u003e\n\u003cli\u003eXZent single lead connector \u0026gt; item: 42arc108\u003c\/li\u003e\n\u003cli\u003eZenec single lead connector \u0026gt; item: 42arc108\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGeneral installation instructions:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVerification:\u003c\/li\u003e\n\u003cli\u003e1: Check all operating functions and vehicle setting functions of the OEM HU.\u003c\/li\u003e\n\u003cli\u003e2: Disconnect the OEM HU voltage-free.\u003c\/li\u003e\n\u003cli\u003e3: Check all interface connections for correctness voltage-free.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eConnection and connection sequence: 1: Check settings and hardware configuration of the interface voltage-free. 2: Check configuration of the HU connection cable voltage-free. 3: Connect the HU connection cable according to the operating instructions of the retrofit HU. 4: Connect all other connections according to the operating instructions of the retrofit HU. 5: Connect the entire installation to the vehicle with the main connection last. 6: Software configuration of the interface according to the instructions in the item text and in the manual. 7: Configure the retrofit HU according to the operating instructions of the retrofit device steering wheel remote control\/camera\/handsfree kit\/antenna phantom powering and others. 8: Function test of steering wheel remote control and vehicle\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChanges to the configuration of the interface and the HU connection cable:\u003c\/li\u003e\n\u003cli\u003e1: Change configuration voltage-free\u003c\/li\u003e\n\u003cli\u003e2: Reconnection see above 5 to 8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eIn case of malfunction of the interface or the vehicle:\u003c\/li\u003e\n\u003cli\u003e1: Reinstall the OEM HU\u003c\/li\u003e\n\u003cli\u003e2: Operate the OEM HU\u003c\/li\u003e\n\u003cli\u003e3: Establish CAN bus shut down\u003c\/li\u003e\n\u003cli\u003e4: Check the hardware configuration of the interface\u003c\/li\u003e\n\u003cli\u003e5: Reconnection after CAN Bus shut down see above 5 and 6\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMore connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist installer.\u003c\/p\u003e\u003cp\u003eMore connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions: 1: Connections and changes are to be carried out exclusively by trained specialist installer. 2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications. 3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection. 4: Connections and modifications are made on the user's own responsibility without guarantee of function. 5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface. 6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.\u003c\/p\u003e","brand":"m-use","offers":[{"title":"Default Title","offer_id":57927689502984,"sku":"3820610313","price":235.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1042\/2291\/6872\/files\/3820610313_121bbf52-66f4-4870-bd5b-26b663a6113a.jpg?v=1780405378","url":"https:\/\/carkitstunter.nl\/products\/st-w-bed-berlingo-expert-proace-rd4-rd45-rd6-3820610313","provider":"CarkitStunter.nl","version":"1.0","type":"link"}